CITY OF PUYALLUP PERMITTING PORTAL

* Final approval by the Building Official is required prior to use or occupancy.* Work shall not proceed until the inspector has approved the stages of construction.* Surface storm water shall be diverted from the building site and shall not drain onto adjacent properties.* I hereby acknowledge that I have read this Permit/Application, that the information given is correct; that I am the owner or the duly authorized agent of the owner; that plans submitted herewith are in compliance with all applicable city, county and state laws and that all construction will proceed in accordance with said laws. This permit shall expire if work is not commenced with 180 days or if the work is suspended for a period of 180 days. Permits expire two years from issuance. * By leaving the contractor information section blank, I hereby certify further that contractors (general or subcontractors) will not be hired to perform any work in association with this permit. I also certify that if I do choose to hire a contractor (general or subcontractor) I will only hire those contractors that are licensed by the State of Washington. If you are a property owner, contractor or permittee and you are paying for someone to perform the work, they must have a valid contractor registration and the person(s) installing plumbing inside a structure must meet the plumbing certification requirements. If you have any questions regarding these regulations, you may contact the Washington State Department of Labor and Industries or you can find more information on-line at: http://www.lni.wa.gov/TradesLicensing/Contractors/HireCon/default.asp

• Comply with 2018 IFC and 2018 IBC • L&I Final required prior to Fire Final • Exit lighting test required, contractor to provide light meter. Exterior lighting required at all Exterior EXIT doors. Most lights have been removed. • Fire Alarm exterior remote Annunciator needs to be removed and placed inside the vestibule. This will require a separate Fire Alarm permit. • In existing buildings all required service and maintenance for the fire sprinkler system and fire alarm system to be updated prior to Final inspection. Documentation required. • Fire sprinklers required to be installed under new entry addition. • K-fire extinguishers required to be installed prior to inspection. • Hood suppression service and maintenance required prior to Final. • RTU’S will be required to be tested for shut down. • Fire extinguishers required per code. • Riser Room and FACP need to have signage posted. • PIV must have a Knox lock or approved lock with an extra key provided in Knox box. • Existing buildings will need to contact central pierce fire & rescue and update the key in the Knox box. • All above items to be completed prior to fire final. Fire final required before building final.

Engineering Division

Development Engineering standard commercial conditions: ** Prior to occupancy the existing grease interceptor must be cleaned and inspected ** - A commercial development must have installed a side sewer sampling tee installed in conformance to city standard section 04.03 – side sewer. - No work shall be done in or on the public right of way without a licensed and bonded contractor first obtaining a right of way permit. - Any code requirement that may have been overlooked in this plan review does not imply that the requirements have been waived.

Engineering Division

** Prior to occupancy the existing grease interceptor must be cleaned and inspected **

Development & Permitting Services

Email to architect - Provided for contractor reference. Justin, Thank you for the advanced questions. Some of these answers will vary based on the scope, I have made some assumptions noted in the replies below, please let me know if you have any questions. We have a restaurant TI in an existing restaurant (Famous Dave's by the South Hill Mall), and I am wondering what all would be required for submission. Complete plans for the scope of work, assuming this will be maintain as a restaurant. The original design had some unique floor plans and dedicated layouts when that space originally opened. Revisions to the these areas may require changes in floor elevations/transitions to work with the new layout. We are planning on leaving the existing hood and since this is not a change of use there is no part of the scope that impacts mechanical. Would we need engineered drawings for mechanical in this case? Generally the existing mechanical equipment may remain. The hood may or may not work depending on the equipment, size and air flow requirements. If unchanged we would need certification (by a qualified mechanical contractor) that the mechanical equipment is in working order and functions per design (this can be done during inspection, but may be helpful to your customer in advance). Due to the time out of service, at the final inspection, we would likely require a preliminary commission report to ensure outdoor ventilation rates are up to standard. Replaced equipment needs to comply with the mechanical and energy codes. https://codes.iccsafe.org/content/WAMC2018P1/chapter-1-scope-and-administration#WAMC2018P1_Ch01_SubCh02_Sec105.5 We do intend to add some plumbing fixtures to the build, would an engineered plumbing design be required for this as well, or could we defer to the licensed plumber to submit prior to construction? We prefer (strongly insist) a single permit package be submitted, coordinating the plumbing, mechanical, building along with the TPCHD reviews for efficiency of review and inspections. As this is a single story restaurant, a plan by a licensed and qualified plumber generally would work. Unless there is a unique design element that cannot be done prescriptively. We look for layout, pipe size, and isometric (fittings as needed) for DWV and supply. New fixtures may require addition of circulation pumps or instant-hots for energy code standards.

Development & Permitting Services

SENT EMAIL TO JUSTIN & CASSIE (WEDDERMANN), ND TO PROVIDE CURRENT CONTRACTOR STATE & BUSINESS LIC. PER L & I CONTRACTOR HAS NOT RENEWED SINCE 2018; $$ TO BE PAID -JF