CITY OF PUYALLUP PERMITTING PORTAL

Engineering Division

Development Engineering standard utility service repair conditions: Site-specific Conditions: Applicant/Contractor Responsibility: 1. The issued permit is always required to be available at the job site and readily available to all City inspectors. The applicant shall be subject to a triple permit fee for failing to have a valid permit on site. 2. The applicant/contractor shall notify the City 24-48 business hours prior to starting work by requesting an inspection through the CityView portal. Inspections performed during a City of Puyallup business day (Monday - Friday 7:00 am – 3:30 pm) are included in the permit fee. Inspections performed outside of the regular hours are charged to the permit holder at the current City of Puyallup Fee Schedule inspection rate with a three-hour minimum. Prior to scheduling weekend and night work, coordinate with a City Inspector by calling 253-435-3650 at least 48 business hours in advance of work. 3. The applicant/contractor shall notify the City prior to starting work by requesting an erosion and sediment inspection, prior to backfilling, prior to site restoration, immediately after all work and restoration are complete, and when the site is ready for final inspection. The applicant/contractor shall request a final inspection through the CityView portal prior to the permit expiration date. General Conditions: 1. No work is permitted in the public right-of-way without a licensed and bonded contractor first obtaining a City of Puyallup right-of-way permit. The permit holder is responsible to keep the existing right-of-way free of debris, dirt, and traffic obstructions. 2. Call the utility notification center at 1-800-424-5555 before beginning any excavation. Call before you dig, it's the law. 3. Comply with all permit conditions and the Traffic Control Plans (TCP) issued by the City. Follow the allowed work hours as listed on the issued permit or on each page of the TCP. 4. If a travel lane will be closed, the applicant/contractor shall call the Communications Center at 253-287-4456 prior to starting work on day of closure and again once the lane is reopened. 5. Request all inspections through the CityView portal on the City website. Prior to scheduling weekend and night work, coordinate with a City Inspector by calling 253-435-3650 at least 48 business hours in advance of work. 6. Do not park vehicles on City sidewalk. Any public curb, gutter, or sidewalk broken now or during construction shall be removed and replaced per City Standards.

Development & Permitting Services

Must provide Contractor doing the work to be named on permit. Contractor must be registered with Washington State Labor and Industries AND have a valid City of Puyallup business license endorsement with Washington State Department of Revenue.

Development & Permitting Services

Contractor needs to have a valid City of Puyallup business license endorsement with Washington State Department of Revenue.

Engineering Division

A Performance Bond must be received by the City of Puyallup prior to permit issuance. The Performance Bond shall be 150% of the estimated cost of work in the ROW per the approved cost estimate received prior to plan approval (attached in CityView Portal under Documents & Images section). See https://www.cityofpuyallup.org/DocumentCenter/View/16622/Performance-Bond-51122-appvd-by-Legal for more information.

Engineering Division

Certificate or Insurance/CG2012 must be received prior to issuance

Engineering Division

An approved reduced pressure backflow assembly (RPBA) device is required to be installed on the commercial water service per City Standard Detail 03.04.02. For more information, visit https://www.cityofpuyallup.org/1131/Backflow-Prevention-Cross-Connection. Upon approval of the installation by the city inspector, the backflow device shall be tested by a Washington State certified backflow assembly tester, and the test report results shall be submitted to the City prior to occupancy of the building.