CITY OF PUYALLUP PERMITTING PORTAL

Other/Miscellaneous

Please show the aisle width between the proposed rack(s) and the existing racks, the lighting of the aisles and exit lighting. The plan set should also include the width and height of the rack(s) (or rack type: Merchandise Display, 2 Level, 3 Level, etc.). Note: the plan resolution is very poor, so this information may already be on the plan set, but is not legible. Updated Comment 9/20/2024: This comment was not addressed. Please update the plans, or provide separate plans, with the requested information.

Other/Miscellaneous

The text on the Proposed / Existing Floor Plan is not legible. Please submit the plan in it's original sheet size and ensure all notes are legible prior to resubmitting.

Other/Miscellaneous

The bottom portion of the Structural Plans are cut off, including the sheet numbers and engineer's stamp.

Other/Miscellaneous

Please show the aisle width between the proposed rack(s) and the existing racks, the lighting of the aisles and exit lighting. The plan set should also include the width and height of the rack(s) (or rack type: Merchandise Display, 2 Level, 3 Level, etc.). Note: the plan resolution is very poor, so this information may already be on the plan set, but is not legible. Updated Comment 9/20/2024: This comment was not addressed. Please update the plans, or provide separate plans, with the requested information.

Other/Miscellaneous

The structural plans note that Special Inspections are not required. However, most (perhaps all) of the post-installed anchors noted on sheet 1 of 2 require Special Inspections per their ICC-ES Reports. Please review the report for the proposed anchors and include a Special Inspection schedule if Special Inspections are required by the report and/or anchor manufacturer. Note: If the report(s) state special inspection(s) are required - the final special inspection report must be on site during City inspections. Please also note: Welding is shown on the plans. All welds must be inspected and approved by a WABO certified special inspector - see Chapter 17, section 1705.2 of the 2021 Washington State Building Code.

Other/Miscellaneous

The text on the Proposed / Existing Floor Plan is not legible. Please submit the plan in it's original sheet size and ensure all notes are legible prior to resubmitting.

Other/Miscellaneous

The bottom portion of the Structural Plans are cut off, including the sheet numbers and engineer's stamp.

Other/Miscellaneous

Please show the aisle width between the proposed rack(s) and the existing racks, the lighting of the aisles and exit lighting. The plan set should also include the width and height of the rack(s) (or rack type: Merchandise Display, 2 Level, 3 Level, etc.). Note: the plan resolution is very poor, so this information may already be on the plan set, but is not legible.

Other/Miscellaneous

The structural plans note that Special Inspections are not required. However, most (perhaps all) of the post-installed anchors noted on sheet 1 of 2 require Special Inspections per their ICC-ES Reports. Please review the report for the proposed anchors and include a Special Inspection schedule if Special Inspections are required by the report and/or anchor manufacturer. Note: If the report(s) state special inspection(s) are required - the final special inspection report must be on site during City inspections. Please also note: Welding is shown on the plans. All welds must be inspected and approved by a WABO certified special inspector - see Chapter 17, section 1705.2 of the 2021 Washington State Building Code.