CITY OF PUYALLUP PERMITTING PORTAL

Engineering Permit Application Status

PRFUP20210127


In order to request inspections, you need to be signed in.

Note: You can collapse and expand individual sections by clicking the header of the section you wish to collapse/expand.

Summary

PRFUP20210127
Franchise Utility Permit
Closed
CH REALTY IX-JV I PUYALLUP LOGISTICS L P
Utility
Transfer facilities to four relocated PSE poles. Transfer overhead drop on one relocated PSE pole. Bore across E main Ave to place (1) 4” conduit to MH 24 to pull in new copper cable. PERMIT EXTENSION PROVIDED TO 11/8/22 TO RAISE MANHOLE LID - CT
12/23/2021
02/09/2022
05/09/2023
11/10/2022

Locations

Property
0420264065

Address
2504 E MAIN, PUYALLUP, WA 98372

0420264065
2504 E MAIN AVE

Reviews

Documents Returned For Corrections

Date Returned Name
02/09/2022 REVISED SITE PLAN PRRFUP20210127 (Stamped)
Review Type Outcome Est. Completion Date Completed
Engineering Review Approved 02/14/2022 02/09/2022
Engineering Review Approved 01/18/2022 12/29/2021
Traffic Control Plan Review VOID 01/18/2022 12/29/2021

Fees

Paid Fees Amount Paid Owing Date Paid
General Engineering Inspection Fee $130.00 $130.00 Paid 12/23/2021
ROW Permit Fee $80.00 $80.00 Paid 12/23/2021
Traffic Control Permit Fee $50.00 $50.00 Paid 12/23/2021
Traffic Control Plan Review Fee $40.00 $40.00 Paid 12/23/2021
Franchise Utility Review Fee $110.00 $110.00 Paid 12/29/2021
Engineering Additional Review Fee $130.00 $130.00 Paid 02/09/2022
Outstanding Fees Amount Paid Owing Date Paid
No outstanding fees.


Permit(s) will not be issued until outstanding fees have been paid in full. Fee details shown above only include currently payable fees, there might be addtional fees to be paid before issuance.

$0.00

Inspections

Inspection Outcome Requested Scheduled Date Inspected
Job Start Inspection Partial Pass 2/23/2022 2/23/2022 02/24/2022
Jeff Hill ((253) 841-5424)
Other/Miscellaneous
Carried Forward
02/24/2022
444 vault lid must be raised to finish grade

Job Start Inspection VOID 2/24/2022 2/24/2022 02/25/2022
Jeff Hill ((253) 841-5424)
Job Start Inspection VOID 2/25/2022 2/25/2022 03/02/2022
Jeff Hill ((253) 841-5424)
Job Start Inspection VOID 2/28/2022 2/28/2022 03/02/2022
Jeff Hill ((253) 841-5424)
Job Start Inspection Not Ready 8/30/2022 08/30/2022
Cheryl Trimble ((253) 841-5464)
Other/Miscellaneous
Carried Forward
09/01/2022
444 vault lid must be raised to finish grade

Job Start Inspection Partial Pass 9/28/2022 9/28/2022 09/28/2022
Jeff Hill ((253) 841-5424)
Other/Miscellaneous
Carried Forward
09/28/2022
444 vault lid must be raised to finish grade

Job Start Inspection VOID 09/28/2022
Jeff Hill ((253) 841-5424)
Other/Miscellaneous
Outstanding
09/28/2022
444 vault lid must be raised to finish grade

Closeout All Work Complete (No Restoration) Inspection VOID 11/02/2022
Cheryl Trimble ((253) 841-5464)
Comment Engineering Div Inspection VOID 11/10/2022
Jeff Hill ((253) 841-5424)
Comment Engineering Div Inspection VOID 11/10/2022
Jeff Hill ((253) 841-5424)
Closeout All Work Complete (No Restoration) Inspection VOID 11/10/2022
Jeff Hill ((253) 841-5424)
Engineering Daily Inspection VOID 11/10/2022
Jeff Hill ((253) 841-5424)

Conditions

Condition Status Department Category Expiration Date Due Date
Right Of Way Permit Conditions Resolved Engineering Division Standard Conditions
: Follow approved Traffic Control Plan (TCP) Work between the hours of 9am & 3pm Call Comm Center day(s) of lane closure at 253-841-5431 Inspection time performed during a regular 8 hour day Monday - Friday 7:00 am - 5:00 pm is included in the permit fee. Inspection time performed outside of those hours are charged to the permit holder at a rate of $130 per hour with a three hour minimum. A. Distance between cones equals speed limit in unit feet. B. Taper length equals width of offset times speed limit squared divided by 60. L = WS² /60 - W= lane width S = speed limit C. Sign spacing shall be 100 feet when speed limit is 30 MPH or less D. Sign spacing shall be 350 feet when speed limit is greater than 30 MPH E. Distance between signs is mandatory unless field conditions determine otherwise. 1. Applicant/contractor shall notify the City within 48 hours prior to work start date and also to close the permit when all work and restoration are complete and ready for final inspection. 2. I agree to have the approved permit on site at all times. 3. UTILITY INSPECTIONS ARE REQUIRED PRIOR TO BACKFILLING. 4. No work shall be done in or on the public right of way without a licensed and bonded contractor first obtaining a right of way permit. 5. I agree to keep the existing right of way free of debris and dirt. 6. I agree to call the Utility Notification Center at 1-800-424-5555 before beginning any excavation. Call before you dig, it's the law. 7. I agree to adhere to the approved Traffic Control Plan. 8. I agree to perform all work in accordance with City's Standards. Any curb, gutter or sidewalk broken now or during construction shall be removed and replaced. 9. I hereby acknowledge that I have read and understand the contents of this permit and I hereby state that the information I have supplied is true and correct. Indemnification / Hold Harmless The Permittee shall defend, indemnify and hold the Public Entity, its officers, officials, employees and volunteers harmless from any and all claims, injuries, damages, losses or suits including attorney fees, arising out of or in connection with activities or operations performed by the Permittee or on the Permittee's behalf out of issuance of this Permit, except for injuries and damages caused by the sole negligence of the Public Entity. However, should a court of competent jurisdiction determine that RCW 4.24.115 applies to this Permit, then the Permittee agrees to defend, indemnify and hold the Public Entity, its officers, officials, employees and volunteers harmless to the maximum extent permitted thereunder. It is further specifically and expressly understood that the indemnification provided herein constitutes the Permittee's waiver of immunity under Industrial Insurance, Title 51 RCW, solely for the purposes of this indemnification. This waiver has been mutually negotiated by the parties. The provisions of this section shall survive the expiration or termination of this Agreement.
Private Utility Permit Conditions Open Engineering Division Standard Conditions
: APPLICANT/CONTRACTOR REQUIREMENTS: 1. PERMIT AND APPROVED TRAFFIC CONTROL PLAN ARE REQUIRED TO BE AVAILABLE AT JOB SITE. NOT HAVING A PERMIT ONSITE SHALL BE SUBJECT TO TRIPLE PERMIT FEE. 2. THE CITY SHALL BE NOTIFIED 24-48 HOURS PRIOR TO JOB START 3. THE CITY SHALL BE NOTIFIED WHEN ALL WORK AND RESTORATION IS COMPETE AND READY FOR FINAL INSPECTION. PRIOR TO RESTORATION, COORDINATE WITH AN INSPECTOR. *** SITE SPECIFIC CONDITIONS *** THE APPLICANT SHALL VERIFY HORIZONTAL AND VERTICAL LOCATION OF EXISTING 48" TRUNCK STORM MAIN, 12" STORM MAIN CROSSING E MAIN, AND ALL OTHER PUBLIC UTILITIES PRIOR TO BORING. All proposed trenching shall be south of the crosswalk and sidewalk. SEE EACH TCP FOR ACCEPTABLE CLOSURE DAYS AND HOURS. CLOSURE ALLOWED for single lane closure: Monday - Friday 9AM - 3PM Call communications center at 253-287-4456 on day of closure. NIGHT WORK REQUIRED for all other TCP configurations. CLOSURE ALLOWED: Sunday - Thursday 9PM - 5AM Call communications center at 253-287-4456 on night of closure. Request an inspection through the CityView portal a minimum of 48 hours in advance of job start. The applicant shall notify all residents and businesses within 300 feet of the work area 48 hours in advance of start date by distributing informational door hangers, displaying work on message boards, or on signs posted visibly along the right-of-way. The permit and traffic control plans shall be posted at the job site and available to inspectors at all times. The applicant shall notify public transportation agencies whose routes or stops are affected by the traffic control plan 24 hours in advance of job start. STEEL PLATE AHEAD and MOTORCYCLISTS USE EXTREME CAUTION advanced warning signs are required for steel plates installed in the public right-of-way. Work shall immediately cease in the work zone for a pedestrian spotter, available at all times, to escort pedestrians around the work area. The applicant shall notify property owner(s) of blocked driveway(s) at least 24 hours in advance. Call Jason Little, City Inspector, at 253-244-0387 prior to starting any work. GENERAL CONDITIONS: 1. Follow approved Traffic Control Plan (TCP) 2. Follow allowed work hours as seen above. 3. If a lane will be closed, call Comm Center on day of closure prior to work start at 253-841-5431. 4. Spotter must be available to assist with pedestrians if needed. 5. To schedule inspection, go to: Secure.cityofpuyallup.org and select appropriate code. 6. Please utilize traffic control information below for TCP: A. Distance between cones equals speed limit in unit feet. B. Taper length equals width of offset times speed limit squared divided by 60. L = WS² /60 - W= lane width S = speed limit C. Sign spacing shall be 100 feet when speed limit is 30 MPH or less D. Sign spacing shall be 350 feet when speed limit is greater than 30 MPH E. Distance between signs is mandatory unless field conditions determine otherwise. 7. Do not open cut without prior approval. 8. Do not park vehicles on city sidewalk. Curb, gutter or sidewalk damaged shall be replaced. Inspection time performed during a regular 8-hour day Monday through Friday 7:00 am - 5:00 pm is included in the permit fee. Inspection time performed outside of those hours are charged to the permit holder at a rate of $130 per hour with a three-hour minimum. INDEMNIFICATION / HOLD HARMLESS: The Permittee shall defend, indemnify and hold the Public Entity, its officers, officials, employees and volunteers harmless from any and all claims, injuries, damages, losses or suits including attorney fees, arising out of or in connection with activities or operations performed by the Permittee or on the Permittee's behalf out of issuance of this Permit, except for injuries and damages caused by the sole negligence of the Public Entity. However, should a court of competent jurisdiction determine that RCW 4.24.115 applies to this Permit, then the Permittee agrees to defend, indemnify and hold the Public Entity, its officers, officials, employees and volunteers harmless to the maximum extent permitted thereunder. It is further specifically and expressly understood that the indemnification provided herein constitutes the Permittee's waiver of immunity under Industrial Insurance, Title 51 RCW, solely for the purposes of this indemnification. This waiver has been mutually negotiated by the parties. The provisions of this section shall survive the expiration or termination of this Agreement.

Related Permit & Planning Applications

There are no related items for this engineering permit application.

Documents & Images

Date Uploaded File Type Name
12/30/2021 Plans N_934894_CAD0 (Flattened) (Stamped)
12/23/2021 Receipt Receipt for transaction:2021-000091
12/29/2021 Receipt Receipt for transaction:2021-000106
12/30/2021 Plans PRFUP20210127 TCP (Flattened) (Stamped)
12/30/2021 Permit Permit - Detailed
12/30/2021 Letter Permit Job Card
02/09/2022 Plans REVISED SITE PLAN PRRFUP20210127 (Stamped)
02/09/2022 Letter Permit - Detailed0
02/09/2022 Receipt Receipt for transaction:2022-000231
02/24/2022 Report Inspection Report (Job Start Inspection)


Should you need assistance, please contact the Permit Center at (253) 864-4165 option 1.