| Review Type |
Outcome |
Est. Completion Date |
Completed |
|
Building Review
|
Failed
|
04/24/2023
|
04/13/2023
|
|
|
|
|
|
See Document Markup
A3.5 - Provide distance to show minimum separation above roof.
|
|
|
See Document Markup
A3.5 - Provide duct material and manufacture specification of clearance from framing members.
Consider heat temperature from ovens to assure spacing and duct material is adequate.
|
|
|
See Document Markup
A3.5 - Provide bracing plan on how duct will be braced from Powder Coat booth to roof penetrations per building code.
|
|
|
See Document Markup
A3.5 - Provide sealed Mechanical Engineer plans for mechanical work.
|
|
|
REVISION 4/10/2023 - ADDED STRUCTURAL DESIGN OF PAINT BOOTH EXHAUST PIPE ROOF PENETRATIONS
|
|
Fire Review
|
Approved
|
04/24/2023
|
04/11/2023
|
|
|
|
|
|
REVISION 4/10/2023 - ADDED STRUCTURAL DESIGN OF PAINT BOOTH EXHAUST PIPE ROOF PENETRATIONS
|
|
Engineering Traffic Review
|
Approved
|
03/07/2023
|
02/22/2023
|
|
|
|
|
|
|
|
Building Review
|
Approved
|
03/07/2023
|
02/22/2023
|
|
|
|
|
|
See Document Markup
REPEAT COMMENT: A3.1: Provide mechanical plan to reflect where and how exhaust will be installed and terminate from existing building. Include CFM per manufacturer's specifications or sealed engineer design.
|
|
|
Other/Miscellaneous
Provide resubmittal form with response letter how comments were addressed.
Markups on the plans are available to reference in the Documents & Images Portal that are associated with comment letter.
|
|
|
See Document Markup
PROVIDE SEALED PLANS BY REGISTERED ENGINEER.
|
|
|
See Document Markup
Provide mechanical plan to reflect where and how exhaust will be installed and terminate from existing building. Include CFM per manufacturer's specifications or sealed engineer design.
Received plumbing and gas piping only.
|
|
|
See Document Markup
Items to address in the ventilation. ?? ???????†? ?? ??????? ??? ???????????? ?????? ?? ??? ?????
ii Termination - no details. ???? ?????????? ??? ???? ???????????†? ?? ????????? ???????? ???????? ?? ?????????????
|
|
|
|
|
Planning Review
|
Approved
|
03/07/2023
|
02/22/2023
|
|
|
|
|
|
|
|
Fire Review
|
Approved
|
03/07/2023
|
02/22/2023
|
|
|
|
|
|
|
|
Engineering Review
|
Approved
|
03/07/2023
|
02/22/2023
|
|
|
|
|
|
Other/Miscellaneous
FIRST REVIEW: In accordance with the Uniform Plumbing Code, please complete, sign, and submit the attached CoP Plumbing Fixture Worksheet which can be found under Documents & Images section in the CityView Portal. The plumbing fixture worksheet should include the existing fixtures (permitted under other tenant improvement permits B-21-0386 and PRCTI20220873) and new plumbing fixtures including the proposed 3 stage washer for the paint booth. [Yianni Charitou @ 01/04/2023 8:28 AM]
SECOND REVIEW: As discussed in this morning’s Permit Check-In Meeting, the CoP Plumbing Fixture Worksheet cannot be deferred until the Manufacturing Permit Tenant Improvement. The worksheet must be completed and returned prior to approval of PRCTI20221916 as outlined in the first review correction. The water and sewer fixture units from the three stage washer should be provided with the worksheet in compliance with the Uniform Plumbing Code. Since the three stage washer is only connecting to water at this time, water system development charges will be assessed on this application. Water system development charges may be deferred in accordance with Puyallup Municipal Code Chapter 14. The sewer system development charges will be assessed when the three stage washer is connected to sanitary sewer under the future Manufacturing Permit Tenant Improvement. [Yianni Charitou @ 02/09/2023 8:29 AM]
|
|
|
E-19-0466 Water/Sewer Availability (static pressure: 52 psi)
B-20-0235 Building Shell Permit (no SDCs required)
B-21-0386 TI Office Permit (water/sewer SDCs assessed)
E-20-0137 Civil (storm SDCs assessed, 1 1/2" domestic water meter, 2" line to structure, 24.75' main to meter, 487.5' meter to structure)
E-20-0299 Storm Availability
P-19-0017 Pre-App
PRCTI20220873 TI Office Expansion (water/sewer SDCs assessed)
PRCTI20221916 TI Paint Booth (499.25' riser to washer, 1" supply line, water SDCs to be assessed on this application, sewer SDCs to be assessed on future TI Manufacturing)
|
|
Engineering Civil Review
|
VOID
|
03/07/2023
|
02/22/2023
|
|
|
|
|
|
Of cheif concern is the Project Description and Deferred Submittals information on Sheet AN-0. Neither of these describe the civil aspects of the paint booth or manufacturing permit. A pre-treatment application is required as are civil plans stamped by a qualified Professional Engineer. Neither are included in the current project nor described in the Deferred Submittals.
|
|
Engineering Traffic Review
|
Approved
|
02/21/2023
|
02/13/2023
|
|
|
|
|
|
|
|
Fire Review
|
Approved
|
02/21/2023
|
02/13/2023
|
|
|
|
|
|
Fire Sprinkler
Separate Fire Suppression permit required.
|
|
|
Other/Miscellaneous
1. Provide complete details including manufacture install instructions, make and model, product manual.
2. There are no details for conveyor system, provide details for attachment, how do you access and exit inside the conveyor system.
3. Provide section views of conveyor system with heights and widths.
4. See Building and Engineering corrections.
|
|
|
|
|
Building Review
|
Failed
|
02/21/2023
|
02/09/2023
|
|
|
|
|
|
See Document Markup
AN-0: Provide all 2018 Energy Code Compliance with Manufacturing permit upon submittal. Include all sheets listed below to support existing envelope condition and any modifications to condition space. Provide compliance for new mechanical and lighting.
|
|
|
See Document Markup
A3.1: Provide legible plans. Due to being scanned unable to read even expanded with all clouded areas.
|
|
|
See Document Markup
A3.1: Provide plans on the gas piping where this will be connected and confirm PSI is available.
|
|
|
See Document Markup
A3.1: Provide plumbing plan to show connection to existing plumbing
|
|
|
See Document Markup
REPEAT COMMENT: A3.1: Provide mechanical plan to reflect where and how exhaust will be installed and terminate from existing building. Include CFM per manufacturer's specifications or sealed engineer design.
|
|
|
See Document Markup
A3.1: Appears installation connections from manufacturer's for conveyor system and paint booth but not legible, if not please provide.
|
|
|
Other/Miscellaneous
Provide resubmittal form with response letter how comments were addressed.
Markups on the plans are available to reference in the Documents & Images Portal that are associated with comment letter.
|
|
|
See Document Markup
|
|
|
See Document Markup
PROVIDE SEALED PLANS BY REGISTERED ENGINEER.
|
|
|
See Document Markup
Provide mechanical plan to reflect where and how exhaust will be installed and terminate from existing building. Include CFM per manufacturer's specifications or sealed engineer design.
Received plumbing and gas piping only.
|
|
|
See Document Markup
Items to address in the ventilation.
i. Support – no details for construction method of the vent.
ii Termination - no details.
iii. Structural for roof penetration – no clearance support, roofing, or engineering.
|
|
|
|
|
Engineering Review
|
Failed
|
02/21/2023
|
02/09/2023
|
|
|
|
|
|
Other/Miscellaneous
FIRST REVIEW: In accordance with the Uniform Plumbing Code, please complete, sign, and submit the attached CoP Plumbing Fixture Worksheet which can be found under Documents & Images section in the CityView Portal. The plumbing fixture worksheet should include the existing fixtures (permitted under other tenant improvement permits B-21-0386 and PRCTI20220873) and new plumbing fixtures including the proposed 3 stage washer for the paint booth. [Yianni Charitou @ 01/04/2023 8:28 AM]
SECOND REVIEW: As discussed in this morning’s Permit Check-In Meeting, the CoP Plumbing Fixture Worksheet cannot be deferred until the Manufacturing Permit Tenant Improvement. The worksheet must be completed and returned prior to approval of PRCTI20221916 as outlined in the first review correction. The water and sewer fixture units from the three stage washer should be provided with the worksheet in compliance with the Uniform Plumbing Code. Since the three stage washer is only connecting to water at this time, water system development charges will be assessed on this application. Water system development charges may be deferred in accordance with Puyallup Municipal Code Chapter 14. The sewer system development charges will be assessed when the three stage washer is connected to sanitary sewer under the future Manufacturing Permit Tenant Improvement. [Yianni Charitou @ 02/09/2023 8:29 AM]
|
|
|
Other/Miscellaneous
FIRST REVIEW: Please provide a plumbing plan for the proposed 3 stage washer. The plumbing plan must clearly depict and label the potable water connection and sanitary sewer discharge to the processed water and treatment facilities as outlined by Development Civil Engineer Jamie Carter's corrections. [Yianni Charitou @ 01/04/2023 11:08 AM]
SECOND REVIEW: Plumbing plans submitted. Applicant confirmed in Red Dot meeting on 2/9/2023 that the 3 stage washer is supplied by a 1" water line and that the washer is not going to be connected to City sewer until the Manufacturing permit. Only water will be connected and discharge will be stored onsite. Applicant was notified that water SDCs will be assessed under this permit and can be deferred per PMC Chapter 14. Sewer SDCs will not be assessed until the Manufacturing permit. [Yianni Charitou @ 02/09/2023 9:11 AM]
|
|
|
E-19-0466 Water/Sewer Availability (static: 52 psi)
B-20-0235 Building Shell Permit (no Eng fees required)
B-21-0386 TI Office Permit (water/sewer SDCs assessed)
E-20-0137 Civil (storm SDCs assessed, 1 1/2" domestic water meter, 2" line to structure, 24.75' main to meter, 487.5' meter to structure)
E-20-0299 Storm Availability
P-19-0017 Pre-App
PRCTI20220873 TI Office Expansion (water/sewer SDCs assessed)
PRCTI20221916 TI Paint Booth (499.25' riser to washer, 1" supply line, water SDCs to be assessed on this application, sewer SDCs to be assessed on TI Manufacturing)
|
|
Engineering Civil Review
|
VOID
|
02/21/2023
|
02/08/2023
|
|
|
|
|
|
Other/Miscellaneous
The submittal does not contain the expected items that are required for permitting of the paint booth and associated processes i.e. descriptions, drawings and specifications that detail the pre-treatment method, process, or technology; including products, chemicals, agents, or devices used for pretreatment. Also all infrastructure associated with the waste stream and the details of the conection to city sewer facilities shall be provided, as well as a City of Puyallup DISCHARGE PERMIT APPLICATION for Significant Industrial Users. All plans and specifications shall be prepared under the supervision of a professional engineer licensed in accordance with Chapter 18.43 RCW and in accordance with the requirements for approval of industrial wastewater facilities contained in Chapter 173-240 WAC. See more detailed information under Puyallup Municipal Code 14.06.031. These requirements were requested and discussed with the applicant very early in this process.
|
|
|
|
|
Planning Review
|
Approved
|
02/21/2023
|
02/07/2023
|
|
|
|
|
|
|
|
Building Review
|
Failed
|
01/12/2023
|
01/05/2023
|
|
|
|
|
|
See Document Markup
AN-0: Provide all 2018 Energy Code Compliance with Manufacturing permit upon submittal. Include all sheets listed below to support existing envelope condition and any modifications to condition space. Provide compliance for new mechanical and lighting.
|
|
|
See Document Markup
A3.1: Provide legible plans. Due to being scanned unable to read even expanded with all clouded areas.
|
|
|
See Document Markup
A3.1: Provide plans on the gas piping where this will be connected and confirm PSI is available.
|
|
|
See Document Markup
A3.1: Provide plumbing plan to show connection to existing plumbing
|
|
|
See Document Markup
A3.1: Provide mechanical plan to reflect where and how exhaust will be installed and terminate from existing building. Include CFM per manufacturer's specifications.
|
|
|
See Document Markup
A3.1: Appears installation connections from manufacturer's for conveyor system and paint booth but not legible, if not please provide.
|
|
|
Other/Miscellaneous
Provide resubmittal form with response letter how comments were addressed.
Markups on the plans are available to reference in the Documents & Images Portal that are associated with comment letter.
|
|
|
|
|
Fire Review
|
Failed
|
01/12/2023
|
01/05/2023
|
|
|
|
|
|
Fire Sprinkler
Separate Fire Suppression permit required.
|
|
|
Other/Miscellaneous
1. Provide complete details including manufacture install instructions, make and model, product manual.
2. There are no details for conveyor system, provide details for attachment, how do you access and exit inside the conveyor system.
3. Provide section views of conveyor system with heights and widths.
4. See Building and Engineering corrections.
|
|
|
|
|
Engineering Review
|
Failed
|
01/12/2023
|
01/04/2023
|
|
|
|
|
|
Other/Miscellaneous
In accordance with the Uniform Plumbing Code, please complete, sign, and submit the attached CoP Plumbing Fixture Worksheet which can be found under Documents & Images section in the CityView Portal. The plumbing fixture worksheet should include the existing fixtures (permitted under other tenant improvement permits B-21-0386 and PRCTI20220873) and new plumbing fixtures including the proposed 3 stage washer for the paint booth. [Yianni Charitou @ 01/04/2023 8:28 AM]
|
|
|
Other/Miscellaneous
Please provide a plumbing plan for the proposed 3 stage washer. The plumbing plan must clearly depict and label the potable water connection and sanitary sewer discharge to the processed water and treatment facilities as outlined by Development Civil Engineer Jamie Carter's corrections. [Yianni Charitou @ 01/04/2023 11:08 AM]
|
|
|
B-20-0235 Building Shell Permit (no Eng fees required)
B-21-0386 TI Office Permit (water/sewer SDCs assessed)
E-20-0137 Civil (storm SDCs assessed)
P-19-0017 Pre-App
PRCTI20220873 TI Office Expansion (Jamie C. reviewed, SDCs not assessed correctly)
|
|
Engineering Traffic Review
|
Approved
|
01/12/2023
|
01/04/2023
|
|
|
|
|
|
|
|
Planning Review
|
Approved
|
01/12/2023
|
01/04/2023
|
|
|
|
|
|
|
|
Engineering Civil Review
|
Failed
|
01/18/2023
|
01/04/2023
|
|
|
|
|
|
Other/Miscellaneous
The submittal does not contain the expected items that are required for permitting of the paint booth and associated processes i.e. descriptions, drawings and specifications that detail the pre-treatment method, process, or technology; including products, chemicals, agents, or devices used for pretreatment. Also all infrastructure associated with the waste stream and the details of the conection to city sewer facilities shall be provided, as well as a City of Puyallup DISCHARGE PERMIT APPLICATION for Significant Industrial Users. All plans and specifications shall be prepared under the supervision of a professional engineer licensed in accordance with Chapter 18.43 RCW and in accordance with the requirements for approval of industrial wastewater facilities contained in Chapter 173-240 WAC. See more detailed information under Puyallup Municipal Code 14.06.031. These requirements were requested and discussed with the applicant very early in this process.
|
|
|
The submittal does not contain the expected items that are required for permitting of the paint booth and associated processes i.e. descriptions, drawings and specifications that detail the pre-treatment method, process, or technology, including products, chemicals, agents, or devices used for pretreatment. Also all infrastructure associated with the waste stream and the details of the conection to city sewer facilities shall be provided, as well as a City of Puyallup DISCHARGE PERMIT APPLICATION for Significant Industrial Users. All plans and specifications shall be prepared under the supervision of a professional engineer licensed in accordance with Chapter 18.43 RCW and in accordance with the requirements for approval of industrial wastewater facilities contained in Chapter 173-240 WAC. See more detailed information under Puyallup Municipal Code 14.06.031. These requuirements were requested and discussed with the applicant very early in the process.
|
